[Last updated 2008-05-04]

Go to:
Catalog Pages (Part Numbers and Prices)
To Place an Order
MRL Technical Papers Available
More Information on Analog Magnetic Tape Recording
About MRL

Magnetic Reference Laboratory (MRL) makes and sells Calibration Tapes (what is a "Calibration Tape"?) for analog audio magnetic tape reproducers in the Open Reel and Broadcast Cartridge formats. Other people do cassettes (we don't).

This page will lead you to all of our literature, which we have put into the Adobe Acrobat (PDF) format. You can download the free Acrobat reader from Adobe's website. If you are not able to download these publications, please email, call, or fax us, and we will mail or fax them to you.

Catalog Pages (Part Numbers and Prices):

• We make many different sets of test signals, and each is described in one of our "Publications". Within each publication you will find the test signal descriptions, part numbers and prices for various tape widths, speeds, standard equalizations, and lengths. All of the recordings are full track, so they can be used with reproducers having any number of tracks.
  
  
• Here are same examples of the catalog pages describing Calibration Tapes with the more popular test signals: 

•  Multifrequency (general purpose, for setting reproducer gain, azimuth, and frequency response from 32 Hz to 20 kHz); 
• Two frequencies (1 kHz, 10 kHz);
  
• Three frequencies 1 kHz, 10 kHz, 100 Hz);
  
• Four frequencies (1 kHz, 10 kHz, 16 kHz, 100 Hz);
  
• Two-speeds with many different selections of frequencies; and 
• Flutter and Speed Test .
   
  
• The Complete List of MRL Publications gives all of the other test signals that we can record for you, including Polarity Calibration, special signals for Sound Technology or for Audio Precision measurement systems, Fast Swept-frequency for use with an oscilloscope, Slow Swept-frequency for use with a plotter, single frequencies, Broadband Pink Noise, Broadband White Noise, and Chromatic Sweep for use on your reproducer's vu meter. It also gives an explanation of the MRL Catalog Numbers.
  

• Which Calibration Tape Should I Buy? An Elementary Guide should help those who are new to analog magnetic tape recording.
  

• Choosing and Using MRL Calibration Tapes , a 12-page technical paper, gives a more advanced discussion of general information that applies to all of our calibration tapes. Topics covered include a guide to choosing a Calibration Tape (standards, test signals available, levels, reference fluxivity, and fringing), tape reproducer adjusting techniques (preliminaries, low-frequency response calibration, what to do in case you don't have the right calibration tape), some tape recorder adjusting techniques, and our specifications and tolerances.
  

• Many other technical papers on magnetic recording are also available online.

To place an order:

• You may order directly from MRL. Contact us by e-mail at mrltapes@flash.net , or call or FAX our order desk at +1.408.227.8631 on weekdays between 09:00 and 17:00 Pacific Time. Orders placed before noon Pacific Time can usually be shipped that day.
   
• You may pay by major credit card (VISA, Master Card, or American Express), or by guaranteed funds (money order or cashier's check). For international payments, see instructions for international money transfers.

• Delivery: Orders placed before noon Pacific Time can usually be shipped that day, but we can't guarantee it. We have a very small staff (usually one or two people), and it may occasionally take up to a week to have your order ready to ship. So if you require your order to be shipped by a deadline, place your order at least a week before that date. Don't wait until the last day!

• Sales tax of  8.25 % will be added to orders shipped to Santa Clara County, CA;  or 7.25 % to orders shipped elsewhere to California.  (We are not required to collect, and we do not collect, any other district taxes).
  
  
• You may place your order with one of our dealers -- this may be easiest for you if you have an account with them. See the list of MRL USA Dealers or MRL International Dealers . If your favorite dealer's name is not listed, ask him to contact us about becoming an MRL dealer.

MRL Technical Papers Available

• Tape Recording Equalization:
  
• Fundamentals and Equalizations for 15 in/s, including suggestions for improved (non-standard) equalizations, with links to several other tech papers.
  
• Standard Tape Flux vs Frequency (IEC Standard, table of values, and program to calculate differences)
• AME (Ampex Master Equalization curve, with tech information and references on this site)
  
• Historical Table of Transition Frequencies / Time Constants from 1969 SMPTE paper
• Master-tape Equalization Revisited
  
• Proposed Equalization for 15 in/s Studio Master Recording on High-output Low-noise Tapes
• "Head bumps" and Low-frequency response -- why the low-end may not sound like what you thought you recorded:
  
• Low-Frequency Response Calibration of a Multitrack Magnetic Tape Recording and Reproducing System (what happens and why, with measurement techniques)
• Link to Jack Endino's measurements of the "head bumps" of 16 popular studio recorders, running at both 15- and 30-in/s, clearly showing the size and frequency of the "head bumps" (some are pretty frightening)
  
• Azimuth in a Magnetic Tape Recorder (measurement methods and tolerances)
• Biasing in Magnetic Tape Recording (what ac bias does; how it affects frequency response, distortion, and more)
  
• Demagnetizing A Tape Recorder
• Head Height Alignment Methods
• Is My Calibration Tape Still Accurate?
• Field Strength for Partial Erasure of Magnetic Tape (how large a field does it take to accidentally erase a tape?)
• Making and using Calibration Tapes, a pair of background papers from Ampex days:
• Bob Morrison's "Reproduce Test Tapes: Evolution and Manufacture"
• Jay McKnight's "Tape Reproducer Response Response with a Reproducer Test Tape"
• Speed, Pitch, and Timing Errors in Tape Recording and Reproducing
• "Scrape Flutter" and Tape Compliance Bibliography
• "Sticky-shed" -- tape binder shedding, and what to do about it
• Tape Information Table , with a summary of coating thickness, coercivity, retentivity, and remanance for 17 professional tapes from Ampex, 3M, and BASF, in consistent (SI) units
  

More Information on Analog Magnetic Tape Recording

For information on all aspects of Ampex tape recorders, see the Ampex Virtual Museum and Mailing List  (not affiliated with Ampex Corp).
For information on all aspects of  Studer tape recorders, see "The Studer List" (not affiliated with Studer Corp).
For information on Sony/MCI tape recorders, see the Sony/MCI discussion group (not affiliated with Sony Corp).
For "Tips/Notes/Formats/Resources", see Richard Hess's Web pages .

About MRL

"Magnetic Reference Laboratory and the State of Reproducer Calibration", by Ralph Hodges, from db magazine, 1980 November.
"Behind The Gear: Jay McKnight of Magnetic Reference Laboratory", by Alex Kostelnik, from Tape Op,  Nr 52 (2006 Mar/Apr).
Jay McKnight at Ampex, the rest of Alex Kostelnik's interview that was not used in the Tape Op article.
For Jay Mcknight's biography.

Back to top.

Updates for this home page

Back to top.